D-Link DWL-G820 Manual page 17

Using the Configuration Menu (continued)
Hexadecimal digits
consist of the
numbers 0-9 and
the letters A-F
ASCII (American
Standard Code for
Information
Interchange) is a
code for representing
English letters as
numbers from 0-127
Wireless Band-
Authentication-
PassPhrase-
Cipher Type-
Group Key
Update Interval-
Encryption-
Key Type-
Key Size-
Valid Key-
Key Table-
Apply-
Advanced > Encryption
IEEE 802.11g
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select WPA-PSK and enter a passphrase in the field below. Each
device on the network must have an identical passphrase to
communicate.
Enter a passphrase when you have enabled WPA-PSK.
Security type.
Enter the interval after which the group key will be updated.
Select Disabled or Enabled.
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.
Input up to four keys for encryption. You will select one of these
keys in the valid key field.
Click Apply to save changes.
17