Using The Setup Wizard - D-Link DWL-G820 Quick Installation Manual

Using the Setup Wizard

®
D-Link Wireless Router/Access Point Users: If you are using the default
SSID and channel settings, the DWL-G820 will connect right out of the box.
No configuration is needed! Simply connect the hardware as shown on pages 4-5.
The DWL-G820 must be connected directly to your computer for configuration.
You cannot configure this device if it is connected to a hub or router.
Connect a standard Ethernet cable from the DWL-G820 to an Ethernet port on the
computer that will be used to configure the DWL-G820. You must assign your computer
a static IP address within the same range as the IP address of the DWL-G820. The
DWL-G820's default IP address is
See the Appendix if you need assistance in assigning a static IP address for your
network adapter.
Open your Web browser and
type http://192.168.0.35
the URL address box. Then
press the Enter or Return key.
The log-in pop-up screen
will appear.
Type "admin" for the
user name and leave the
password field blank.
Click OK
192.168.0.35
into
6
with a Subnet Mask of 255.255.255.0.