Replacing A Controller - Dell EqualLogic FS7600 Series Hardware Owner's Manual

Dell EqualLogic FS7600 Hardware Owner's Manual
2. Fit the band tightly around your wrist.
3. Connect the banana plug to ground, or attach the plug to the alligator clip and connect the clip to a grounded
device such as an ESD mat or the metal frame of a grounded piece of equipment.

Replacing a Controller

If a controller fails, you can replace it while the appliance is online.
Many repairs require a Dell-certified service technician. You should perform troubleshooting and simple
repairs only as authorized in your product documentation or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Read and follow the safety instructions that came with the product.
Removing a Controller
Do not detach a controller without consulting with the owner of the group.
1. Log in to the Group Manager application or use the CLI and locate the group with the member you want to
detach.
2. Select the controller that you want to detach.
3. In the Activities panel for that controller, click
After the NAS controller has detached, the power to the controller automatically turns off.
4. Disconnect all network cables.
5. Press the release latch. See callout 1 in
10
Figure 6: Using an Electrostatic Wrist Strap
Detach NAS Controller
Figure 7.
2 Replacing Components
.