Page 4
THANK YOU FOR BUYING A RYOBI PRODUCT. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving To ensure your safety and satisfaction, carefully read through parts. Loose clothes, jewellery or long hair can be caught in this OWNER’S MANUAL before using the product.
To use the tool in the screwdriver mode, set one of the numbers “1” to “21” indicated on the torque adjustment cap (2) to the marked SPECIFICATIONS ) on the top side of housing. The higher number on the torque CLD-120 CLD-144 adjustment cap, the greater the torque. Battery 12V, 1,300mAh Li-ion 14.4V, 1,300mAh Li-ion...
For removing screws, push the reversing switch to the left position. MAINTENANCE After use, check the tool to make sure that it is in top condition.It is recommended that you take this tool to a RYOBI Authorized Service Center for a thorough cleaning and lubrication at least once a year.