Putting In The Screen; Warranty And Liability; Maintenance, Care, Storage And Transport - cabstone CAB EASYFIX U-Slim XL User Manual

User's manual

5.3 Putting in the screen

WARNING! Risk of injury by overburding and stumbling.
>> Let a second person help you.
>> Putting in the screen in a wrong way may damage it by falling off and can injure people or
damage things.
1. Put in the prepared screen together with a second person into the wall plate.
6

Warranty and Liability

• The producer grants a 2 years warranty to a new device.
• As the manufacturer has no influence on installation, warranty only applies to the product itself.
• If any fault or damage is detected on your device, please contact your dealer and provide your sales slip or
invoice as evidence of the purchase, if necessary. Your dealer will repair the fault either on site, or send the
device to the manufacturer. You make the work of our technicians considerably easier, describing possible
faults in detail – only then you can be assured that faults, occurring only rarely, will be found and repaired with
certainty!
• The manufacturer is not liable for damages to persons or property caused by improper installation, operation or
maintenance, not described in this manual.
• Do not alter or modify the product or its accessories.
• Any use other than described in this user`s manual is not permitted and causes loss of warranty, loss of
guarantee, and non-liability.
• We reserve our right for misprints and changes of the device, packing, or user`s manual.
7

Maintenance, Care, Storage and Transport

• The product must be maintained only by professional workshops.
• Protect the angles from dirt and grease them regularly with light machine oil.
• Use a dry and soft cloth to clean your product. Be careful to avoid scratches. Use a slightly moist cloth for
heavy stains. Look out for live cables! Do not use any cleaning supplies. This can cause burns to the materials.
Avoid liquid entry to the device.
• Make sure no body parts will be pinched in the swivel device, when parts of the device are moved!
• Periodically check, if all attachments and screws are secured, and tighten them again when they are loosened.
This may be caused e.g. by frequent movements. Do not over-tighten screws.
Fig. 6: Putting in
End of assembling. To remove, proceed in reverse order.
Page 6 / 8
CAB EASYFIX U-Slim XL