Using The Configuration Menu - D-Link DWL-AG700AP Manual

DWL-AG700AP User's Manual

Using the Configuration Menu

To configure the DWL-AG700AP, use a computer which is connected to the
DWL-AG700AP with an Ethernet cable.
First, disable the Access the Internet using a proxy server function. To disable
this function, go to Control Panel > Internet Options > Connections > LAN
Settings and uncheck the enable box.
Start your Web browser program (Internet Explorer, Netscape Navigator) .
Type the IP address of the DWL-AG700AP in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-AG700AP and your computer are in the same subnet.
After the connection is established, you will see the user identification window as
shown.
Note: If you have changed the default IP address assigned to the DWL-AG700AP, make sure to
enter the correct IP address.
Note: If you have changed the password, make sure to enter the correct password.
D-Link Systems, Inc.
http://192.168.0.50
Type admin in the User Name field
Leave the Password field blank
Click OK
Using the Configuration Menu
11