Chapter 8: Device Id - Epson ET-7750 Programming Manual

CHAPTER 8: Device ID

This printer can send its device ID when it is requested.
When IEEE1284.4 is enabled,
@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX,ESCPR2,END4,GENEP; (*1)
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
CID:EpsonRGB;
FID: FXN,DPA,WFA,ETA,AFN,DAN,WRA;
RID:region ID;
DDS:<size>; (*4)
ELG: 0D05;
SN:<serial number>;
When IEEE1284.4 is disabled,
@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC,ESCPR2,END4,GENEP; (*1)
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
CID:EpsonRGB;
FID: FXN,DPA,WFA,ETA,AFN,DAN,WRA;
RID:region ID;
DDS:<size>; (*4)
ELG:0D05;
SN:<serial number>;
Model Name
ET-7750
L7180
L7188
EW-M970A3T
*1: 'END4' means supporting 'The extension for non-D4'.
*4: DDS parameter:
<size> is six bytes ASCII code that indicates minimum dummy data size for END4 protocol in hexadecimal.
For example, if the size is 20000h, DDS description is "DDS:020000;".
*6: SN parameter:
<serial number> is 18 bytes ASCII code that indicates USB serial number in hexadecimal.
For example, if the number is 0123456789ABCDEF01h, SN description is "SN:0123456789ABCDEF01;"
Revision: 1
(*6)
(*6)
for North America/Euro/Pacific
for Euro
for Asia
for Japan
2018/2/26
Page: 94