Table of Contents
Advertisement
•
Even in manner mode, the cell phone still emits a
sound when autofocusing, a shutter sound when you
take a photo.
Changing the Incoming Ring Tone
When the standby screen is displayed, press
➡
Use
to select Function and then press
(Select).
➡
Use
to select Sound/Vib/LED and then press
(Select).
➡
Use
to select Incoming Setup and then press
(Select).
➡
Use
to select Incoming Call and then press
(Select).
➡
Use
to select
(Select).
➡
Use
to select Original and then press
(Select).
➡
Use
to select a ring tone and then press
(Set).
The incoming ring tone is set.
•
If you press
(Play), the tone plays.
➡
Press
(OK).
(Ringtone) and then press
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press
➡
Use
to select Function and then press
(Select).
.
➡
Use
to select Sound/Vib/LED and then press
(Select).
➡
Use
to select Incoming Setup and then press
(Select).
➡
Use
to select Incoming Call and then press
(Select).
➡
Use
to select
then press
➡
Use
to adjust the volume and then press
(Set).
•
Each press of
STEP ↑
The ring tone volume gradually increases.
STEP ↓ ↓
The ring tone volume gradually decreases.
Level5
The ring tone sounds at the set volume.
Level1
The ring tone does not sound.
OFF
➡
Press
(OK).
(Ringtone Volume) and
(Select).
changes the volume one step.
.
17
Advertisement
Table of Contents
