Getting Started - D-Link DWL-7100AP Manual

Getting Started

Right out of the box, with its default settings, the DWL-7100AP will automatically connect
with other D-Link AirPremier
Note: If you are using a DHCP-capable router in your network you will not
need to assign a static IP address.
If you need to assign IP addresses to the computers on the network, please
remember that the IP address for each computer must be in the same IP address
range as all the computers in the network, and the subnet mask must be exactly the
same for all the computers in the network.
For example: If the first computer is assigned an IP address of 192.168.0.2 with a
subnet mask of 255.255.255.0, then the second computer can be assigned an IP
address of 192.168.0.3 with a subnet mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP address, one or
more of the devices may not be visible on the network.
Infrastructure
An wireless network contains a wireless access point or router. The
Infrastructure Network example, shown on the following page, contains the following
D-Link network devices:
A wireless Access Point - D-Link AirPremier
An Ethernet Router - D-Link DI-604
A laptop computer with a wireless adapter - D-Link AirPremier
A desktop computer with a wireless adapter - D-Link AirPremier
A Cable modem - D-Link DCM-201
AG products.
TM
IP ADDRESS
AG DWL-7100AP
TM
9
AG DWL-AG660
TM
AG DWL-AG530
TM