D-Link DWL-6000AP Manual page 5

The DWL-6000AP is compatible with most popular operating systems, including
Macintosh, Linux and Windows, and can be easily integrated into a large network.
This Manual is designed to help you connect the Access Point with the D-Link
2.4GHz Air Plus or 5GHz Air Pro Wireless Adapters into an existing network. Please
take a look at the Getting Started section in this manual to see an example of an
Infrastructure network using the DWL-6000AP.
Connections Connections
Connections
Connections Connections
MDI RJ-45 Eth MDI RJ-45 Eth
MDI RJ-45 Ethern MDI RJ-45 Eth MDI RJ-45 Eth
•
Straight-Through Straight-Through
Straight-Through Straight-Through Straight-Through
connecting to a router or switch
•
Cross-Over Cross-Over Cross-Over
Cross-Over Cross-Over
computer
Features & Benefits Features & Benefits
Features & Benefits
Features & Benefits Features & Benefits
•
Supports 802.1x Authentication when used with EAP-MD5 or EAP-TLS
•
Supports Data Transfer Rates of up to 108 Mbps at 5GHz in Turbo mode
•
Supports Data Transfer Rates of up to 22 Mbps at 2.4GHz with D-Link Air Plus
products
•
Wireless Range of up to 900 feet*
•
Fully 802.11a and 802.11b compatible
•
Supports up to 256-bit WEP Encryption at 2.4GHz and up to 152-bit with
Enhanced Dynamic Keying at 5 GHz
•
Less Interference with a total of Eleven Non-Overlapping Channels
•
Utilizes Direct Sequence Spread Spectrum (DSSS) and Packet Binary
Convolutional Code (PBCC) at 2.4GHz
•
Utilizes Orthogonal Frequency Division Multiplexing (OFDM) at 5GHz
*Architectural and environmental factors may adversely affect range.
ern ern et P et P ort ort
ern ernet P et P et Port ort ort
cable is required when
cable is required when connecting directly to an ethernet adapter on a
Reset Reset
Reset Reset Reset
P P P P P ower Receptor ower Receptor ower Receptor
ower Receptor ower Receptor
5