D-Link DWL-6000AP Manual page 16

Using the Configuration Menu Using the Configuration Menu Using the Configuration Menu
Using the Configuration Menu Using the Configuration Menu
A A A A A dvan dvanced > P dvan dvan ced > P ced > Perf ced > P erf erf erform
dvan ced > P erf
The default Performance settings are shown in the illustration above.
Wireless Band:
range) or 802.11b (up to 22 Mbps speed with AirPlus adapters.)
Turbo Setting: Select Enabled or Disabled. The default setting is Disabled for
802.11a. 802.11b does not have the Turbo mode option.
Frequency: The frequency range will be displayed.
Channel: The default channel for 802.11a is 36.
The default channel for 802.11b is 6.
Data Rate: Select the transmission rate for the network
Beacon Interval:
wireless network. Specify a Beacon interval value (20-1000.) Default (100) is
recommended.
DTIM: (Delivery Traffic Indication Message) Enter a value between 1 and 255 for the
Delivery Traffic Indication Message (DTIM.) A DTIM is a countdown informing clients
of the next window for listening to broadcast and multicast messages.
orm orman orm an ance ce ce ce ce an an
orm
Select 802.11a (up to 108 Mbps speed in turbo mode in the 5GHz
Beacons are packets sent by an Access Point to synchronize a
16