Table of Contents
Advertisement
Hardware Installation
You will need to turn off your PC
to install the card. Once your
computer is turned off, unplug the
power cord from the computer.
Open the case and insert the
D-Link adapter into an available
PCI slot. Once inserted, close the
case and insert the power cable
into the computer. Turn on your
computer.
Note: Before installing, write down
the serial number and hardware
revision (e.g. A1) in case you need
to contact technical support.
When your computer boots up you
may see the Found New Hardware
wizard screen.
Click Cancel
5
D-Link DWA-54 Quick Install Guide
Advertisement
Table of Contents
