Installing the DUB-H4
A. Plug the USB type B connector (the
larger end of the cable) into the back of
the DUB-H4.
B. Plug the AC adapter into the DUB-H4
and into a power socket in a power-strip
or a wall jack.
C. Plug the USB type A connector (the
narrow end of the cable) into an
available USB 2.0 port on your
computer (or USB 1.1 if you don't have
USB 2.0).
D. Your computer will automatically detect and install the DUB-H4. You may now
connect USB 2.0 or USB 1.1 devices to an available USB port on the front of the
DUB-H4.
Type B
Type A