Advertisement

Quick Links

200697_5

Important Notes

This heater must not be located immediately below a fixed socket outlet.
Do not use the heater in the immediate surrounds of a bath, a shower, or a swimming pool.
Do not cover this heater, or obstruct the air inlet or outlet, otherwise there is a risk of
overheating.
The heater must be cooled down completely before any maintenance
This heater must be fixed against a vertical surface.
Under no circumstances should the heater be used as a free standing appliance.
After unpacking, please make sure that the appliance is intact, with no signs of damage caused by
transport. If in doubt, do not use the appliance and contact the Service Centre.
During normal operation this appliance will emit noise from the internal fan unit.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Children should be supervised to ensure that they do not play with the appliance or handset
Children of less than 3 years should be kept away unless continuously supervised. Children aged
from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been
placed or installed in its intended normal operating position and they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the
appliance or perform user maintenance.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Cleaning and user maintenance shall not be made by children without
supervision
Some parts of this product can become very hot and cause burns. Particular attention has to be
given where children and vulnerable people are in the vicinity.
Do not use this appliance as a primary heat source
Ensure that furniture, curtains and other combustible materials are positioned no closer that 1m
from the front of the fire.
Do not stand the fire on the carpet – stand on a firm surface, which projects 250 mm (10 inches)
beyond the front of the fire and is free of dust and lint.
If this fire is supplied through an extension cable, please ensure that it is the only appliance
plugged into the extension and that the instructions for the extension cable / reel are followed.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut out, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.
This appliance must be positioned so that the plug / fused spur is accessible
In the event of a fault please disconnect the fire from the mains supply
Warning: This appliance must be earthed.
The wires in the mains lead connected to this appliance are coloured in accordance with the following
code:
GREEN and YELLOW
BLUE
BROWN
As the colour of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol or coloured Green or Green and Yellow. The wire
which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured
Black. The wire which is coloured Brown must be connected to the terminal which is marked with
letter L or coloured Red.
Model 1434 (18") and 1499 (16") Electric Heater
User instructions for LED effect 2kw Heater
These instructions should be read carefully and retained for future reference
Earth
Neutral
Live
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1434 and is the answer not in the manual?

Questions and answers

Summary of Contents for Be Modern 1434

  • Page 1 200697_5 Page 1 Model 1434 (18”) and 1499 (16”) Electric Heater User instructions for LED effect 2kw Heater These instructions should be read carefully and retained for future reference Important Notes  This heater must not be located immediately below a fixed socket outlet.
  • Page 2 200697_5 Page 2 Please unpack carefully ensuring that any loose parts and all packing items are removed. Read any warning labels carefully (see Maintenance Section). Place waste packaging back into box and dispose of RESPONSIBLY. The appliance must be positioned so that plug or fused spur is accessible. Only when you are certain that you have completed the installation should you plug in and switch on at the wall socket.
  • Page 3 200697_5 Page 3 Thermostat This model is fitted with a thermostat that is mounted on the left-hand side of the heater box control panel (see figure 3). It can be used to control the heat output to maintain a constant room temperature to suit user requirements. This will ensure that excessive heat is not produced unnecessarily.
  • Page 4 200697_5 Page 4 Care Warning: Before undertaking any maintenance or cleaning disconnect appliance from main supply. Only competent persons should service / repair appliances. PLEASE NOTE THAT THIS APPLIANCE USES A MOTOR TO OPERATE THE FLAME EFFECT AND THE HEATER, IN OPERATION IT MAY BE POSSIBLE TO HEAR EITHER OF THESE MOTORS WHERE THE BACKGROUND NOISE IS VERY LOW.
  • Page 5 200697_5 Page 5 Electric Fire Guarantee Be Modern Ltd. (the ‘Company’) provide a twelve month guarantee in respect of electric fire (the ‘Product’) ranges. 1. The twelve month Guarantee applies to:  All ‘Products’ in the ranges manufactured by the ‘Company’ (but subject to exceptions below); where ...

This manual is also suitable for:

1499

Table of Contents