Printing With Windows Xp/2000 - D-Link DP-311P User Manual

Printing
with Windows XP/2000
Set the switch to Config mode on the rear panel of the DP-311P.
Change your wireless adapter setting to Ad-Hoc or Peer-to-Peer mode. (Open
the Configuration utility for your network adapter and make sure that your
network adapter is set to Ad-Hoc mode in your configuration settings.)
(For D-Link network adapters, you can open the web-based configuration utility
and go to the Site Survey function and select the SSID named WLAN-PS. The
Channel is 1 and WEP is set to Disable. The network adapter will now be in Ad-
Hoc mode.)
Change the wireless adapter IP Address so that it is in the same IP Address range
as the DP-311P (192.168.0.x). For instructions on changing the IP Address,
please refer to the Networking Basics section in this manual. The subnet mask is
255.255.255.0.
Restart the computer.
Open your web browser and input the IP Address of your wireless print server.
The default IP Address is 192.168.0.10.
17