D-Link DP-101P+ Quick Installation Manual page 3

Setting up your DP-101P+ for network
printing in Windows XP
For additional Windows operating system setup or information
on the web-management interface, refer to the manual located
on the CD-ROM.
The factory default IP address of the DP-101P+ is
192.168.0.10. In order to print to the your printer through
the DP-101P+, the DP-101P+ must have the same IP
network settings as your network. If you would like to
change the IP address of the DP-101P+ to conform to your
network, please refer to the Manual for instructions to do so.
For Windows XP:
Go to Start>Printers and
Faxes>Add a Printer
Double-click on the
"Add Printer" icon
Click Next