Before First Use; Daily Use - Zanussi ZWF50820WW User Manual

Table of Contents

Advertisement

The indicator light goes on for delaying: 3, 6 & 9
hours.
SETTINGS
ACOUSTIC SIGNALS
The acoustic signals operate when:
The programme is completed.
The appliance has a malfunction.
To deactivate/activate the acoustic signals,
press Extra Rinse
and Delay Start
same time for 6 seconds.
If you deactivate the acoustic signals,
they continue operate when the
appliance has a malfunction.
CHILD LOCK
With this option you can prevent that the children
play with the control panel.

BEFORE FIRST USE

1. Make sure that the electrical and water
connections comply with the installation
instructions.
2. Remove the polystyrene block and any material
from the drum.
3. Put a small quantity of detergent in the
compartment for washing phase.

DAILY USE

WARNING! Refer to Safety chapters.
LOADING THE LAUNDRY
Open the water tap. Connect the mains plug to the
mains socket.
1. Pull the door handle to open the appliance
door.
2. Put the laundry in the drum, one item at a time.
3. Shake the items before you put them in the
appliance.
Make sure not to put too much laundry in the drum.
Refer to maximum loads indicated in "Programme
chart".
4. Close the door.
10
To activate/deactivate this option, press
Prewash
time until the indicator
You can activate this option:
After you press
at the
programme knob are locked.
Before you press
start.
4. Set and start a programme for cotton at the
highest temperature without laundry.
This removes all possible dirt from the drum and the
tub.
and Extra Rinse
comes on/goes off.
: the options and the
: the appliance cannot
CAUTION! Make sure that no laundry
stays between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
at the same

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents