Prepare; Step 1 - Setting The Cutting Heights; Step 2 - Connection To The Power Supply - McGREGOR MER1232 Instruction Manual

Prepare

Step 1 - Setting the Cutting Heights

When cutting longer grass always raise the cutting height and cut the grass in 2 or more passes by
lowering the cutting height gradually at each pass, never cutting the grass by more than half its
height.
Cutting adjustment
Cutting heights
When cutting longer grass always raise the cutting height and cut the grass in 2 or more
•
passes by lowering the cutting height gradually at each pass, never cutting the grass by
more than half its height.

Step 2 - Connection to the power supply

Hook the mains cable through the cable strain-release.
•
Connect the plug to the main socket.
•
Customer Helpline 0345 605 2063
Rear
20 / 30 / 40 / 50 / 60mm
17