Siriusxm® Radio - JVC KD-X360BTS Instruction Manual

SiriusXM® Radio
Only SiriusXM® brings you more of what you love
to listen to, all in one place. Get over 140 channels,
including commercial-free music plus the best sports,
news, talk, comedy and entertainment. Welcome to the
world of satellite radio. A SiriusXM Vehicle Tuner and
Subscription are required. For more information, visit
<www.siriusxm.com>.
Preparation:
1
Connect the optional SiriusXM Vehicle Tuner
(commercially available).
Expansion port on
the rear panel
2
Check your Radio ID for activation.
The SiriusXM Radio ID is required for activation and
can be found by tuning to Channel 0 as well as on
the label found on the SiriusXM Vehicle Tuner and its
packaging.
The Radio ID does not include the letters I, O, S or F.
3
Activate the subscription.
For users in the U.S.A.:
Online: Go to <www.siriusxm.com>
Phone: Call 1-866-635-2349
For users in Canada:
Online: Go to <www.siriusxm.ca/subscribe-now>
Phone: Call 1-877-438-9677
Press B SRC repeatedly to select SIRIUS XM to start
4
updating.
12
ENGLISH
JS_JVC_KD_X360BTS_K_EN_4.indd 12
(for KD-X360BTS)
Antenna
SiriusXM Vehicle Tuner
Start listening
1 Press B SRC repeatedly to select SIRIUS XM.
2 Press .
" " lights up.
3
Turn the volume knob to select a CATEGORY, then press the knob.
4 Turn the volume knob to select a category from the list, then press the knob.
If "ALL CHANNELS" is selected, all the available channels will be shown.
5 Turn the volume knob to select a channel, then press the knob.
(or)
Press S / T to search for a channel manually.
• Pressing and holding S / T changes the channel rapidly.
If a locked channel or a mature channel is selected, a pass code input screen appears. Enter
the pass code to receive the channel. (Page 14)
Settings in memory
You can store up to 18 channels.
Store a channel
While listening to a channel...
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and "MEMORY" appears.
Select a stored channel
Press one of the number buttons (1 to 6) (or press J / K on the remote control).
(or)
1
Press .
2
Turn the volume knob to select PRESET, then press the knob.
3
Turn the volume knob to select a preset number, then press the knob.
6/1/2018 3:52:13 PM