Faqs - Seiki SC-7350AU9FLCO Nstruction Manual

FAQs

Problem
Washing
machine is not
starting
Door can't be
opened
Water Leakage
Detergent
residues are in
the dispenser
Indicator or
display isn't
working
Abnormal
Noise
Display LED
Possible Cause
Door is not
closed properly
Washer's
safety protection
is active
The connection
between inlet
pipe or outlet
hose is not tight
detergent might
be dampened
Disconnect the
power, PC
board or harness
may have a
connection
problem.
Description
Door lock
problem
Water injecting
problem while
washing
Solution
Restart after the door is closed, check if the
clothes are stuck
Disconnect the power and restart
the appliance
check and fasten water pipes.
Clean up outlet hose.
Clean and wipe the detergent dispenser
Check if the power is on and the power plug
is connected correctly.
Check if the Transport bolts at the back of
the appliance have been removed.
Check it's installed on a level and solid floor.
Possible Cause
Door is not closed
properly.
• Tap is not
opened or
water flows too
slowly.
• Inlet valve filter
is blocked.
• Inlet pipe is
twisted.
• If water is not
supplied
Solution
Restart after the door
is closed.
• Open the tap or
wait until the water
supply becomes
normal.
• Check inlet valve
filter
• Straighten the water
pipe
• Check the other
taps in the room.
29