Eversan 9374 Installation And Operating Instruction Manual

These instructions must be followed to ensure correct operation. The warranty will be violated and
considered null if inspection and operating procedures are disregarded.
Should you require assistance or have any questions, please call 800-383-6060.
Check List
• Model 9374 Scoreboard
• Control Console with LCD readout
• Two Conductor Control Cable (Cabled Systems Only)
• (4) Z Brackets
• (2) Antenna (Wireless Systems Only)
NOTE: Please check that these items are available prior to initial test of the scoreboard. If you are
missing any items, please call (800) 383-6060 for assistance.
A. Unpack scoreboard.
B. Unpack cable and control console. Plug the console cable and console into the console
connector on back (see diagram).
C. Assemble scoreboard using the instructions and hardware supplied before testing but prior to
hanging the scoreboard.
D. Testing - Remove four screws holding the panel on the 120VAC access box on the back of the
scoreboard. There is a standard 120VAC plug for testing. After testing cut connector provided.
Match colors on power cable provided to three wires on 120V box. This board operates on
120VAC at approximately 4 AMP.
NOTE: FAILURE TO TEST SCOREBOARD PRIOR TO INSTALLATION
Power scoreboard using 120VAC and test scoreboard using the operating instructions provided.
SHOULD THERE BE A MALFUNCTION OR SHIPPING DAMAGE,
EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058
EVERSAN
FOOTBALL SCOREBOARD
Installation AND OPERATING INSTRUCTIONS
Customer Shipping Inspection
WILL VOID ALL WARRANTIES.
NOTIFY THE SHIPPER AND EVERSAN IMMEDIATELY.
www.eversan.com
Page 1
MODEL 9374