Eversan, Inc. should be notified with in 24 hours of delivery of any damaged or missing parts. No claim made after 30 days on missing or damaged parts will receive compensation.
1. Determine 120VAC entrance and run conduit to pre-installed electric box on back of scoreboard (see diagram). 2. The scoreboard draws under 12 amp but requires its own circuit breaker. Eversan, Inc. recommends using a 20-amp, GFCI breaker. CAUTION: Cabled System Only The data cable is a pre-wired, 2 conductor shielded, 22GA stranded cable.
For a wireless system to work the scoreboard must always be turned on before the control console. 1. Turn the power to on each 9378 scoreboard that you want to control. The scoreboards should show the center segment of each digit illuminated.
BRIGHT: Control the how bright or dim the LED digits are. Press and release the button on the keypad to increase the brightness of the digits. EVERSAN, INC. • 34 Main Street, Whitesboro, NY 13492 • 1-800-383-6060 Fax: 315-736-4058 www.eversan.com...
Page 8
Wireless control console battery operation (optional): 1. Turn the scoreboard power on. 2. Attach Eversan, Inc.’s special battery connector to the 4-pin connector on the back of the wireless control console (see diagram). 3. Connect the cigarette lighter plug into the Eversan battery pack or a car cigarette lighter.
The EVERSAN Outdoor Scoreboard modular design allows easy removal and replacement of all key elements. Under no circumstances will EVERSAN, INC. pay for service performed on any of our products without expressed written notice from EVERSAN, INC. to the Service Company.
Need help?
Do you have a question about the 9378 and is the answer not in the manual?
Questions and answers