Sent Box; Templates - Pantech PG-1910 User Manual

The message to be saved before sending will be saved in the Draft Box.
Press the [Options] Soft key [
List to select the following menu.
Delete: Deletes the message.
Delete All: Deletes all messages in the Draft Box.
Edit: edit Draft message.

1.5 Sent Box

Select 'Menu>1. Messages>5.Sent Box"
The message that you sent is stored in the Sent Box.
Press the [Edit] Soft key at the bottom right corner to Edit and send
a sent message using the recipient's number.
Select [Options] Soft key on the bottom of the message list to select
one of the following options.
Forward: Sends the sent message to another recipient.
Delete: Deletes the selected message.
Delete All: Deletes all messages in Sent Box.
Edit: Edits and sends a sent message using the recipient's number.

1.6 Templates

Select 'Menu>1.Messages>6 Templates'.
Left] at the left of Total Message
Select a text template menu and press the [Options] Soft key
Left] at the left for associated options.
[
Create New: Makes a new template. Not available if the template
space is full.
Delete: Deletes a template you have defined. Default template is not
appeared.
Delete all : Deletes all messages in Templates box. Default template
is not appeared.
Edit: Edits the Templates.
Send: Edits and Sends the Templates.
1.7 Settings
Select 'Menu>1.Messages>7.Settings'.
1.7.1 Text Msgs.
Select 'Menu>1. Message>7.Settings>1.Text Msgs.'
joystick.
text message
You can set up default
the following options.
Message Center: Allows you to store or change the number
of your message center required when sending a message.
You must obtain this number from your service provider.
Message Format: Allows you to set the message type to
Normal, Fax, Voicemail, ERMES, National Paging, X.400, or
and push in on
information using this menu with
43