Technical Specifications; Functions Of Main Components - A.O. Smith LOTUS-75TC User Manual

Reverse osmosis
Table of Contents

Advertisement

Available languages

Available languages

Technical Specifications

Model No.
Voltage
Power Rating
Suitable Water Pressure
Operating Pressure
Inlet Temperature
Maximum Daily Water TDS Value
Maximum Daily Water Production Volume
Tank Volume
Flushing Method
Electric Shock Protection Type
Suitable Water Quality
Dimensions
Weight
Note: the parameters above may change due to product improvements, but the product name plate shall remain the same. TDS refers to influent total dissolved solids.
Note:
0.1 MPa = 1.02 Kg/cm
2
= 14.5Psi
1 Psi = 0.07 Kg/cm
2
Functions of the Main Components
The standard configuration of the water purifier that utilizes the current,
most advanced international RO technology is as follows:
• The first stage is a 5-micron PP filter (Sediment):
The pores on the aperture within the PP filter is 5 microns wide so it
can effectively filter rust, sand, other larger particles and solid impurities
suspended in the water.
• The second stage is a granular activated carbon filter:
The filter effectively absorbs chlorine, mould, disinfection by-products,
odors, discolorations and other materials suspended in the water.
• The third stage is a 1-micron PP filter (Sediment):
This filter further removes small particles within in the water, suspended
solids, colloids, etc.
LOTUS - 75TC
AC 220-240V 50HZ
36 W
0.1 ~ 0.35 MPa
0.6 ~ 0.8 MPa
5 ~38˚C
≤1000 PPM
75 Gallons, approximately 284 Liters
2.5 Gallons, approximately 9.5 Liters
Auto Flushing
Type II
Munical tap water meeting the GB5749-2006 standarts
270 × 410 × 420 mm
11 kg
1 Gallon = 3.785 Liters
75 GPD = 75 Gallons/Day = 284 Liters/Day = 197 Milliliters/Minute
• The fourth stage is the RO membrane:
The membrane has an aperture of 0.0001 micron (0.1 nm) that reduces
bacteria by 4,000 fold, reduces viruses by over 200 fold, so you can
effectively remove bacteria, viruses, heavy metals, pesticide residue,
and other harmful substances contained in your water supply .
• The fifth-stage is a post-activated carbon filter:
This filter regulates the taste of water and keeps the water fresh .
Note: This machine also has an optional configuration
which is as follows:
Pretreatment Filter: KDF two stage filter, KDF three stage filter, sintered
activated carbon filter Post-filter: Alkaline filter, infrared mineralization
activated carbon filter, alkaline sterilization filter, sterilizing filter.
Post-filter: Alkaline filter, infrared mineralization & activated carbon filter,
post alkaline sterilization resin filter, post sterilization resin filter
ENG 9

Advertisement

Table of Contents
loading

Table of Contents