Kolcraft Transitional 3 Drawer Dresser Assembly Instructions Manual page 12

(J) Drawer Back
Seat drawer bottom firmly in groove
Drawer Back should be
seated in all four grooves
Drawer Assembly Step 3:
A. Rotate the drawer sides outwards slightly to give some clearance room to assemble the
drawer back.
B. Starting on one end, slide the Drawer Bottom (I) into the Drawer Back (J) groove. Align
the QuickBlock and dowels, pressing firmly together to connect the two pieces.
C. Carefully work your way to the other drawer side, making sure the drawer bottom is
securely aligned in the drawer back groove. Align the QuickBlock and dowels, pressing firmly
together to connect the two pieces.
D. Slide a Metal Clip (M) over both QuickBlocks to secure the connection.
Slide the drawer bottom into the
groove of the drawer back.
Rotate drawer sides outward slightly
(I) Drawer Bottom
Speed Clip blocks
should be aligned