Kolcraft Brooklyn Crib Assembly Instructions Manual page 10

Undo both screws on
each side
(E) Left Crib Side
Converting to a Day Bed:
A. Undo the four screws attaching the Upper Footboard (B) to the Crib Sides (D & E) and
remove the upper footboard. There are two screws on each side. It is not necessary to totally
remove them from the crib sides, just loosen until footboard can be removed.
B. Adjust the Mattress Support (F) to its lowest position, using the procedure shown in Step
2.
C. Place the Left Day Bed Cap (G) against the Left Crib Side (D) (the extra two threaded
holes should face the inside of the crib as shown), align the two screws with the holes on the
cap, and tighten with the allen wrench.
D. Repeat for the Right Day Bed Cap (H).
(G Left Day Bed Cap
(B) Upper Footboard
(H) Right Day Bed Cap
Toddler guard rail holes
should face inside
(F) Mattress Support Should
be set to lowest position
9