Energy-Saving Cooling Mode; Display Luminosity; Setting The Current Time - LG S18ICE Owner's Manual

Energy-Saving Cooling Mode

Energy-saving cooling mode can save energy in cooling operation, because it can operate e ciently by
setting body-adaptation time according to the change of time and temperature and adjusting desired
temperature automatically.

Display Luminosity

The unit display Luminosity can be adjusted by using the remote controller.
Open the cover of the remote controller and press the LED LUMINOSITY button.
Display LED will be dark. Press the button again to set bright display.
(The order of 100% 0% LUMINOSITY is repeated whenever you press the button.)
If you press any button it will return to 100% LUMINOSITY.
But, except ROOM TEMPERATURE CHECKING BUTTON.

Setting the Current Time

1
Press the TIMER BUTTON For 3 seconds.
2
Press the TIMER SETTING BUTTONS until the desired time is set.
- The order of a.m. and p.m. -> hour ->minute is repeated whenever you press
the < > button.
- By pressing the
3
Press the SET/CLEAR button.
NOTE
Check the indicator for a.m. and p.m.
1. Press the ON/OFF BUTTON to start the unit.
2. Open the cover of the remote controller.
Select cooling operation.
3. Press the ENERGY-SAVING COOLING MODE BUTTON.
4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLING MODE BUTTON again and unit will operate in previous
mode(Cooling mode).
button, you can set the current time.
Operating Instructions
Owner's Manual 13