Air Circulation Operation; Auto Clean Operation - LG S18ICE Owner's Manual

Operating Instructions

Air Circulation Operation

Auto Clean Operation

During Auto Clean Operation, moistures left in indoor units after cooling operation or healthy
dehumidi cation operation can be removed.
PLASMA Puri cation Operation
Plasma puri cation operation can be started by pressing the PLASMA BUTTON on the
remote controller.
Repressing it will deactivate the operation.
NOTE
• This features can be used in any operation mode and fan speed by pressing the plasma button.
• Separate plasma puri cation operation is possible in stop condition. It is cancelled by pressing plasma
button or on/o button.
12 Air Conditioner
This operation circulates the air without cooling or heating. It can be
activated by pressing the OPERATION MODE SELECTION
BUTTON. Once the air circulation is activated you can select the fan
speed by pressing the INDOOR FAN SPEED SELECTION BUTTON.
NOTE
: During this operation , 'Operating' lamp lights up.
Select Auto Clean Operation by the function setting button(
Now whenever the unit is turned o , the indoor fan is still running
for about 30 minutes internally without cooling or dehumidi cation
operation. This function dries up any remains of moisture & cleans
the unit internally. If you push the Auto Clean button again, this
function is cancelled.
NOTE
During Auto Clean fuction, only ON/OFF button, Plasma button, Auto Clean
button is used. During this operation, 'Co' lamp lights up.
Plasma lter is a technology developed by LG to get rid of microscopic
contaminants in the intake air by generating a plasma of high charge electrons.
This plasma kills and destroys the contaminants completely to provide clean
and hygienic air.
NOTE
During this operation, 'Plasma + Ion' and 'operating' lamp lights up.
MODE
) .
PLASMA