NOCO Genius G26000EU User Manual & Warranty page 4

Mode Explanation
In Standby mode, the charger is not charging or providing any power to the battery. Energy Save is activated during this
mode, drawing microscopic power from the electrical outlet. When selected, an orange LED will illuminate.
Standby
No Power
For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a
12V
white LED will illuminate.
NORM
14.5V | 26A | Up to 500Ah Batteries
For charging 12-volt batteries in cold temperatures below 50ºF (10ºC) or AGM batteries. When selected, a blue LED will
12V
illuminate.
COLD/AGM
14.8V | 26A | Up to 500Ah Batteries
24V For charging 24-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a
white LED will illuminate.
NORM
29V | 13A | Up to 250Ah Batteries
24V
For charging 24-volt batteries in cold temperatures below 50ºF (10ºC) or AGM batteries. When selected, a blue
COLD/AGM
LED will illuminate.
29.6V | 13A | Up to 250Ah Batteries
12V
For charging 12-volt lithium-ion batteries, including lithium iron phosphate. When selected, a blue LED will illuminate.
LITHIUM
Press & Hold
14.2V | 26A | Up to 500Ah Batteries
12V
For charging 12-volt advanced AGM batteries, which requires a higher than normal charging voltage. When selected, a
blue LED will illuminate.
AGM+
Press & Hold
15.5V | 26A | Up to 500Ah Batteries
16V
For charging 16-volt lithium-ion batteries, including lithium iron phosphate, which are commonly used in racing vehicles.
When selected, a blue LED will illuminate.
LITHIUM
Press & Hold
19.45V | 20A | Up to 250Ah Batteries