EEG HD1490 Product Manual page 10

HD1490 HD Encoder Frame Card
There are two main sections in the DashBoard interface: the Status in-
formation on the left side and the Setup menu on the right side. At the
bottom of the interface, you will find the Upload button, which can be
used to upgrade your HD1490's software, and the Reboot button, which
can be used to reboot your HD1490.
The upper section on the left shows the Card State and the Connection
status, each of which has an indicator light and description of the card's
status. There is a more detailed tab labeled Status Information below
the two basic indicators that provides information about the card's ver-
sion and its current setup configurations.
The System Status section shows what video types are present and
the current status of the Ethernet connection. Output Status displays
the mode that the encoder is operating in; the icon will be green when
9