Advertisement
Using The Setup Wizard
If your ISP requires a
IP
Address, and this option
is selected, then this screen
will appear:
Enter the IP address that
was originally provided to you
by your ISP. You will need
to complete all the required
fields.
Next
Click
If your ISP uses
(Point-to-Point Protocol
over Ethernet), and this
option is selected, then this
screen will appear: (Used
mainly for DSL Internet
service.)
Enter in the username and
password provided to you
by your ISP.
Next
Click
Please be sure to remove
any existing PPPoE client
software installed on your
computers.
10
Static
PPPoE
DI-724U Install Guide
D-Link Systems, Inc.
Advertisement
