Touchpad - HP ENVY 17 Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad
bracket is available using spare part number L20096-001. The TouchPad cable is available using spare part
number L20681-001.
Description
For use only on computer models in natural silver finish
Before removing the TouchPad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the TouchPad:
1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect
the TouchPad cable from the system board.
2. Detach the TouchPad cable (2) from the keyboard/top cover. (The TouchPad cable is attached to the
keyboard/top cover with double-sided adhesive.)
3. Remove the three Phillips M2.0×2.3 broad head screws (3) that secure the TouchPad to the keyboard/
top cover.
4. Remove the four Phillips M2.0×3.3 screws (4) that secure the TouchPad and TouchPad bracket to
the keyboard/top cover.
5. Remove the TouchPad bracket (5).
Bottom cover on page
Battery on page 26).
24).
Component replacement procedures
Spare part number
L20701-001
35