Viewing A Photo File As A Slide Show; Setting The Clock; Using Your Player As An Alarm Clock - LG DM5430 Owner's Manual

24 Operating
Viewing a PHOTO file as a
slide show
i
1. Highlight the file (not folder) which you like
beginning slide show.
2. Use W/S/A/D to highlight the Speed.
Then, use A/D to select the (3s/ 5s/ 8s) option
you want to use and then press ENTER (b).
3. Use W/S/A/D to highlight the (Slide Show)
then press ENTER (b).
About help menu for slide show.
Menu
a/d
Prev./ Next
4
x
RETURN
Close
b
Hide

Setting the Clock

1. Turn the power on.
2. Press CLOCK for at least 2 seconds.
3. Choose from either, by using
C or V.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET/CD M for confirm your selection.
5. Select the hours. by using
C or V.
6. Press SET/CD M.
7. Select the minutes, by using
C or V.
8. Press SET/CD M.
Buttons Operation
Rotating the
W/S
picture.
Moving to
A/D
another file.
Returning to the
menu.
Hiding the help
ENTER
menu.
Using your player as an alarm
clock
1. Turn the power on.
2. Press TIMER. Each functions flashes.
3. Press SET/CD M when the function you want to
be woken by is showing.
4. "ON TIME" will be displayed. This is where you
set the time you want the alarm to start. Use the
C or V to change the hours and minutes
and SET/CD M to save.
5. The "OFF TIME" will be displayed. This is where
you set the time you want the function to stop.
6. Use the C or V to change the hours and
minutes and press SET/CD M to save.
7. You will be shown the volume (VOL) you want
to be woken by. Use the C or V to change
the volume and SET/CD M to save. The clock
icon "(" shows that the alarm is set.
8. Press TIMER button 2 times. You can check the
setting status.
,
Note
y If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
y If you set the clock time and alarm, you
can check the alarm icon "(" by pressing
CLOCK even when the player is turned off.
y If you set the clock time and alarm, you
can check the alarm icon "(" and setting
information by pressing TIMER even when
the unit is turned off. Then this function will
working in everyday.