Table of Contents
Advertisement
hElp
Link indicator is flashing red
• The Link between your units is broken. You will also hear an
alert on the Parent unit to let you know there is no communication
between the units. If this happens, check that the mains power (or
batteries) is correctly connected and that the units are within range
of one another. See page 12 for instructions on linking the units.
Battery low on Parent unit
• Put the Parent unit back on the charger to charge.
• Place the Parent unit back on the charger as
frequently as possible or ideally leave it on the charger
to ensure the batteries remain charged.
• To fully charge the batteries, the Parent unit should be on
charge for approximately 16 hours to reach maximum charge.
• To speed up the charging process turn the Parent
unit off when charging if it is not being used.
Parent unit remains silent or very quiet
• You may have set the volume too low to increase the volume.
• You may have switched a Mute feature on.
You can hear a high pitched noise
• The units might be too close to each other.
• The volume setting might be too high.
Talk back feature is not working
• Check that the units are linked.
40
Advertisement
Table of Contents
