Belkin Baby 200 User Manual page 11

sEtting Up
Place the Parent unit into the charger. The red charging
light will illuminate on the charger to indicate that the
batteries are being charged. Leave the batteries to
charge for 16 hours to reach maximum charge.
The Parent unit rechargeable batteries will lose charge
over a period of time, even if switched off.
Charging light
Battery low warning – Parent unit
When the batteries are low – approximately within 1 hour of running
out – the Parent unit will emit a low battery alert and the low battery
indicator on the unit will turn red. Place the Parent unit back on the
charger to charge the batteries. To speed up the charging process
turn the Parent unit off when charging if it's not being used.
You can still use your Parent unit to monitor your baby
even when the batteries are low, provided it remains
in the charger cradle to re-charge the batteries.
Warning
Never use non-rechargeable batteries in the Parent unit.
Only use the recommended type – 2 x AA NiMH 1300mAh
batteries. Using other types could permanently damage the
unit. Charge the batteries as instructed in this user guide. The
Parent unit can still be used when it is in the charger.
Removing the batteries
If you ever need to remove the batteries, simply slide open the battery
compartment cover and use the ribbon to eject the batteries.
25