Belkin N150 User Manual page 5

gETTing sTaRTED
6. After logining in, you will see the main interface below. Click
Wizard from the main menu on the left. it will guide you through
fast and accurate internet connection. Click finish to finish, and
now you are connected to the internet via your new Belkin router.
7. during setup you may be asked for additional information.
You may need to enter a username and password provided
by your isP. this username and password is likely to be
found on materials that came from your isP when you
signed up for service. if necessary, you may need to contact
your isP to retrieve your username and password.
if you have a static iP address, you may need to enter
additional information also provided by your isP.
if your PC has been installed with a wired network card, connect
your PC to a lAN interface of the router using the ethernet cable.
Configure the tCP/iP properties of your network card to obtain an
iP address automatically from modem, or set the iP address of the
computer as 192.168.2.X/255.255.255.0. the X is from 2 to 254.
enter your VCi and VPi information provided by your isP.
5