Belkin N150 User Manual page 13

TROUblEshOOTing, sUppORT, anD WaRRanTY
i've installed this new Router and some of my network clients
(computers, game consoles, ect .) are now unable to connect .
Your new router came pre-configured with a network name and
password, found printed on an attached card. All clients must use this
network name and password to connect wirelessly to your router.
You will need to find the network settings on your client, select the
network name printed on the card from the list of available networks,
and enter the password when prompted to join the wireless network.
Does the Route support Wireless protected access (Wpa) security?
the router ships with WPA/WPA2 security turned on.
Windows XP and some older network hardware may
require a software update to support WPA/WPA2.
i am having difficulty setting up Wpa security on my Router .
1. log in to your router by visiting http://192.168.2.1
with your Web browser.
Click on the "login" button in the top right-hand corner of the screen.
You will be asked to enter your password. if you have never set a
password, leave the "Password" field blank and click "submit".
2. Click "security" under the "Wireless" heading in the left-hand menu.
3. select the "WPA/WPA2" option.
4. enter a password. this can be from 8-63 characters of your choice,
including spaces and punctuation, or a 64-digit hexadecimal
number (using only the numbers 0-9 and letters A-F).
5. Click "Apply Changes" to finish. Your wireless
connection is now encrypted. each computer using your
wireless network will need to use the new key.
note: if you are configuring the router over a wireless connection, you
will have to re-connect to the router after changing any security settings.
note: some older networking hardware supports only WeP encryption.
if your older computers cannot connect to your network, try 128-bit
or 64-bit WeP, or seek software updates from their manufacturers.
13