Installation; Package Contents; Before You Connect To The Network - D-Link DGS-1005D User Manual

Installation

Package Contents

Before You Connect to the Network

Installing the Switch
Power On
Package Contents
Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the
following items:
•
One DGS-1005D 5-Port 10/100/1000BASE-T Gigabit Ethernet Switch
•
Four rubber feet with adhesive backing
•
One external power adapter
•
Wall-mounting kit
•
This manual
If any item is missing or damaged, please contact your local D-Link reseller for replacement.
Before You Connect to the Network
The site where you install the Switch may greatly affect its performance. Please follow these guidelines for
setting up the Switch.
•
Install the Switch on a sturdy, level surface that can support at least 3 kg (6.6 lbs.) of weight. Do not
place heavy objects on the Switch.
•
The power outlet should be within 1.82 meters (6 feet) of the Switch.
•
Visually inspect the power cord and see that it is fully secured to the AC power port.
•
Make sure that there is adequate space for proper heat dissipation from and adequate ventilation around
the Switch. Leave at least 10 cm (4 inches) of space at the front and rear of the Switch for ventilation.
•
Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating
ranges.
•
Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration,
dust, and direct exposure to sunlight.
•
When installing the Switch on a level surface, attach the rubber feet to the bottom of the device. The
rubber feet cushion the Switch, protect the casing from scratches, and prevent it from scratching other
surfaces.
D-Link DGS-1005D Unmanaged Gigabit Ethernet Switch
6
SECTION 2