Introduction - Husqvarna V554 Operator's Manual

INTRODUCTION

Congratulations
Thank you for purchasing a Husqvarna stand-
on mower. This machine is built for superior
efficiency to rapidly mow primarily large areas. A
control panel that the operator can easily access
and a hydrostatic transmission regulated by
steering controls each contribute to the machine's
performance.
This manual is a valuable document. Read the
contents carefully before using or servicing the
machine. The following of instructions (use,
service, maintenance) by all who operate this
machine is important for the safety of the operator
and others. It can also largely increase the life
span of the machine and increase its resale
value.
If you sell your machine, be sure to give the
operator manual to the new owner.
The last chapter of this operator manual supplies
a Service Journal. Make sure that service and
repair work are documented. A correctly kept
service journal reduces service costs for the
maintenance and affects the machine's resale
value. Please contact your dealer for more
information. Take the operator manual along
when the machine is taken to your dealer for
service.
General
In this operator manual, left and right, rearward
and forward are used in relation to the machine's
usual driving direction.
Continuous dedication to make our products
better requires that specifications and design are
subject to change without notice.
Driving and Transport on Public Roads
Check applicable road traffic regulations before
transporting on public roads. If the machine is
transported, you must always use approved
fastening equipment and make sure that the
machine is correctly attached. DO NOT operate
this machine on public roadways.
Operating
This machine is constructed only for mowing
grass on lawns and even ground without
obstacles such as stones, tree stumps, etc.
All other types of uses are incorrect. The
manufacturer's directions concerning operation,
maintenance, and repairs must be carefully
followed.
4
Lawn mowers and all power equipment, can
be potentially dangerous if used incorrectly.
Safety requires good judgment, careful use in
accordance with these instructions and common
sense.
The machine must only be operated, maintained,
and repaired by persons who know the machine's
special qualities and who are also knowledgeable
about the safety instructions. Use only approved
repair parts to maintain this machine.
Accident prevention regulations, other general
safety regulations, occupational safety rules, and
traffic regulations must be followed without fail.
Unauthorized modifications to the design of the
machine can absolve the manufacturer from
liability for resulting personal injury or damage to
property.
Stand On Walk Behind Option
The mower is designed to be used as either
a stand-on or walk behind unit. The latch on
the rear of the unit releases the platform so
the operator can ride the mower in a standing
position. The latch will hold the platform securely
out of the way if walk behind use is preferred.