Related Manuals for MYE MWCS-AT9-CXA
Summary of Contents for MYE MWCS-AT9-CXA
- Page 1 MWCS-AT9-CXA MYE 900MHz (Wireless) CableSAT MYE Entertainment 1-661-964-0217 www.myeclubtv.com All Rights Reserved 2016...
- Page 2 Transmitter Installation **Before using CableSAT, the TV tuner needs to be scanned to register the set top box on channel 3 1) Remove the rear cover of the Cybex Console. 2) Locate the CSAFE controller port. Unplug anything that might already be installed to this port. 3) Plug in the MCC-CX cable into the gray Cybex CSAFE port.
- Page 3 Receiver Installation Use MWCS-C3-S straight cable to run power from the MACA-9V power supply to the CableSAT receiver’s power IN. Connecting the receiver to the SET TOP BOX can be achieved by ONE of the two options. OPTION 1: Plug the MWCS-IR emitter cable into the receiver and attach the IR !!!!!.emitter to the Set Top Box IR window.
- Page 4 ***Once the receiver is installed you can select your Set Top Box (below). Unit is shipped in AT&T mode. Match the lit LEDS to your Set Top Box type. 1) Start with the CableSAT Receiver power disconnected. 2) Using a pen or paperclip, press and hold the “PGM” switch. 3) Connect power to CableSAT Command Receiver.
- Page 5 WARRANTIES GIVEN ABOVE FOR THOSE SAME PARTS. MYE HEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES THEREAFTER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. MYE ENTERTAINMENT ALSO...
Need help?
Do you have a question about the MWCS-AT9-CXA and is the answer not in the manual?
Questions and answers