Aiming Pattern; Imaging Range - Opticon OPN-3200i Specification Manual

7.2. Aiming Pattern

The aiming is used for the following purpose:
1. Light source to indicate the appropriate reading range
2. Light source for auto trigger operation
The aiming specifications are as follows:
・ An optical axis of imaging field of view and the center of horizontal aiming width coincide at a
distance of L=65±20 mm from the front edge of the scanner.
・ The horizontal aiming width to the horizontal width of imaging filed of view at a distance of L=65
mm is 80%±10%.

7.3. Imaging Range

The range is ±5% from the following values.
L: Distance from the front edge of scanner
H: Horizontal imaging range
V: Vertical imaging range
Figure 2: Aiming Pattern and Imaging Range
[mm] 60
[mm] 66
[mm] 42
8
Specifications Manual
80 100 120 140
82 97 111 125
52 62 72 82
OPN-3200i
160
136
93