Code Identification; Reset To Factory Settings - GE 33705 Instruction Manual

Using Your Remote

Code Identification

1. Press and hold down the Setup button
2. Press and release the desired device
3. Press and release Enter button.
4. Press and release the #1 button.
5. Press and release Enter button to exit

Reset to Factory Settings

1. Press and hold the Setup button
2. Press and release the OK button.
3. Press and release the number #0 button.
on the remote until the red light on
the remote control turns on. Release
the Setup button. The red light will
remain on.
button (TV, cbl, dvd, aux) you would like
the code for.
Count the number of times the remote
light flashes. This is the number
corresponding to the first digit of the
code. Repeat the process by pressing
the #2, #3 and #4 buttons for the
remaining digits.
this mode.
until the red indicator stays on
(approximately 2 seconds) and then
release the button.
The red indicator light will flash twice.
12