AEG KME521000M User Manual page 13

Clock function
MINUTE MINDER
00:00 COUNT UP TIMER
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set
the minutes.
The display shows
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.
7.3 Setting the DURATION
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes and
then the hours. Press
When the set Duration time ends the
signal sounds for 2 minutes.
setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the oven functions
to the off position.
Application
Use to set a countdown time. This function has no ef-
fect on the operation of the oven. You can set the MI-
NUTE MINDER at any time, also if the appliance is off.
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the oven op-
erates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
7.4 Setting the END
1. Set an oven function.
2. Press
and
3. Press
At the set End time the signal sounds for
2 minutes.
and the set
the display. The oven turns off
automatically.
4. Press any button or open the oven
5. Turn the knob for the oven functions
7.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
3. Press
The display shows flashing
4. Press
to confirm.
Oven turns on automatically later on,
and time
works for the set DURATION time and
stops at the set END time.
At the set END time the signal sounds
for 2 minutes.
in the display. The oven turns off.
again and again until
starts to flash.
or to set the hours and
then the minutes. Press
confirm.
and time setting flash in
door to stop the signal.
to the off position.
again and again until
starts to flash.
or to set the minutes and
then the hours for DURATION time.
Press to confirm.
or to set the hours and
then the minutes for END time. Press
to confirm.
and time setting flash
ENGLISH 13
to
.