Advertisement
System Requirements
•
Internet Explorer 6.x or above
•
CPU: 800MHz or above
•
Memory Size: 128MB (256MB recommended)
•
VGA card resolution: 800x600 or above
Note: If using multiple cameras for viewing/recording, the minimum requirements
are a 2GHz or above CPU with 512MB memory and a 32MB video card.
Hardware Installation
Connect the Ethernet Cable
Connect an Ethernet cable to the Ethernet connector located
on the Internet Camera's bottom panel and attach it to the
network.
If you connect this camera directly to a PC,
you will need a cross-over Ethernet cable. If
you connect the camera into a hub or router,
you will be able to use the cable included with your
camera.
Attach the External Power Supply
Attach the external power supply to the DC power input
connector located on the Internet Camera's bottom panel
(labeled DC 5V 2A) and connect it to an AC power outlet.
Power source is confirmed when
the LED Power Indicator on the
Internet Camera is illuminated.
The LED will flash red when you first power on the unit. The LED will not turn green until
the camera is configured.
2
Advertisement
