Vertex Standard EVX-534 Operating Manual page 21

l W
onE orKEr
Press, (or press and hold), the assigned PF key, the
display indicates "L-WK ON" briefly, and activates
the Lone Worker feature. The Lone Worker feature
is designed to emit an alarm for 30 seconds when the
Lone Worker Timer (programmed by your Vertex
Standard dealer) has expired.
Press again, (or press and hold again), the assigned
PF key, the display indicates "L-WK OFF" briefly,
and the Lone Worker feature is disabled. If the user
does not reset the timer by pressing the PTT switch,
the radio switches to Emergency mode.
g u /d
roup p oWn
Press, (or press and hold), the assigned PF key to se-
lect a different group of channels. A group name will
appear briefly on the display.
cH u /d
p oWn
Press, (or press and hold), the assigned PF key to se-
lect a different channel. A channel name will appear
briefly on the display.
EVX-534 O M
pErating
a
dvancEd
anual
o
pEratIon
prI-2 s
Et
Press, (or press and hold), the assigned PF key to
toggle the current channel to the priority channel 2
"enable" and "disable". When PRI-2 channel is re-
called, the "P" icon will be indicated on the display.
prI-2 d
IsaBlE
Press (or press and hold) the assigned PF key, the
display indicates "PRI2 DI" briefly, and disable the
priority channel 2 of the group temporarily.
Press again, (or press and hold again), the assigned
PF key, the display indicates "PRI2 EN" briefly, and
enabling the priority channel 2 of the group.
prI-2
Press, (or press and hold), the assigned PF key to re-
call the pre-programmed PRI-2 (Priority-2) Channel
by your Vertex Standard dealer directly.
d cH 1 d
IrEct to
Press, (or press and hold), the assigned PF key to
recall the pre-programmed channel by your Vertex
Standard dealer directly.
FCC ID: AXI11153020
IC: 10239A-11153020
cH 4
IrEct
19