Now You Are Ready To Fly; Recognizing The Front & Back Of The Tilt; How To Start/Stop Rotors; Speed Select Button - Propel RC TILT Instruction Booklet

NOW YOU ARE READY TO FLY!

If you have successfully synced your TILT ™ to your controller as explained on page 4 you are now ready to
fly.Before beginning to fly your drone you should familiarize yourself with how to start and stop the rotors,
how to use your auto land feature and how the controls work so please carefully read and familiarize
yourself with various control features explained in the next few pages.Once again as a beginner pilot you
should learn how to control your drone in a large open field or park on a day with zero or very light wind.
Do not try to fly your Tilt™ too high until you become a more experience pilot.
RECOGNIZING THE FRONT & BACK OF THE TILT ™
Even though the TILT ™ has four rotors there is still a front or "forward" facing direction and "back" or
backwards facing direction.The Front and forward facing direction of the TILT ™ is the side with two EYES
(see diagram E ).The rear and back of the Quadrocopter is the side with battery compartment (see diagram E).
NOTE: The front of the Quadrocopter also displays WHITE LED light and the back of the Quadrocopter displays
RED LED lights.
E

HOW TO START/STOP ROTORS

Make sure you have properly synced the TILT ™ and the power is on.
• To start and stop the rotors simply move the two control sticks either simultaneously down and to the
inside or down and to the outside corners and hold for one second (see illustration below).
Note:Either position will both start and stop the rotors so use the position you are most comfortable with.
• Once the rotors begin to spin,release the control sticks and they will return to the center position.Now
you are ready for take-off.

SPEED SELECT BUTTON

The TILT ™ has 3 speed settings; 1 (SLOW),2 (MEDIUM) and 3 (HIGH). The Default setting when you first
turn on your TILT ™ is the 1 (SLOW) speed mode.To increase the speed simply trigger the speed setting
button (see remote diagram on pg 3) you will hear a beep and the speed setting indicator on the face of the
controller will show you what speed setting you are on.Speed settings can be set before flight or during the
flight.
AUTO LAND BUTTON /AUTO TAKE OFF
The TILT ™ has an auto land and auto take off feature which allows you to land or take off automatically.
Simply press the Auto Land Button and your TILT ™ will begin land or take off by itself.
Note:you can still control the direction while auto landing or taking off to avoid obstacles
5
FRONT
REAR

3 CHANNEL VS 4 CHANNEL FLYING

Propels unique"switch-blade"technology allows you to choose between 3ch or 4ch flight control modes.
Most people with no experience in flying multi copters may find 3ch easier to learn at first as controls are
set up to simply move forward,back,turn left and turn right.4channel flying gives the operator ultimate
control by adding two more dimensions of flight,banking left and banking right.
To change to 3 Channel mode:
Switch the 3/4 CH.button to left side on the back of controller (see remote diagram on pg 3),you will hear
3"beeps" indicating the TILT ™ now is set to 3 CH.mode.
To change to 4 Channel mode:
Switch the 3/4 CH.button to right side on the back of controller (see remote diagram on pg 3),you will hear
4"beeps" indicating the TILT ™ now is set to 4 CH.mode.
3 CHANNEL FLIGHT CONTROL
Below is a list of basic flight functions for your long-range remote to control the TILT ™.While learning to fly
your TILT ™ it is best to start in a large space with the drone facing away from you until you get used to the
basic controls.As you master flying your TILT ™ you can move to more advanced maneuvering techniques.
Practice makes perfect! When you have these basic steps down you can move to the next level.
Move the left Throttle stick up to increase the
propeller speed and the TILT ™ will accelerate
and ascend.
Move the left Throttle stick down to decrease the
propeller speed and the TILT ™ will decelerate
and descend (see diagram F).
While in the air,move the right Direction Stick up
and the TILT ™ will move forward.
Move the right Direction Control down and the
TILT ™ will move backward (see diagram G).
While in the air,move the right Direction Control left
and theTILT ™ will spin to the left.
Move the right Direction Control right and the
TILT ™ will spin to the right (see diagram H).
F
G
H
6