General - Sony BRAVIA KDL-49W757E Operating Instructions Manual


Reconfigure your network settings.

If the LAN cable is connected to an active server
and the TV has acquired an IP address, check your
DLNA Certified™ media server's connections and
configurations.
Note

Your IP address configuration can be viewed by
selecting the [View Network settings and status]
option.
DLNA Certified™ media server is inaccessible
although it is listed under [Media] in the
Home Menu

Check your LAN cable/connection or your server
connections. The TV may have lost connection
with the server.

Perform [Media Server Troubleshooting] to check
if your media server is properly communicating
with the TV. Press HOME, then select [Settings]
t
[Preferences] [Setup]
t
Network Setup]
Troubleshooting].
When using the renderer function, music files
cannot be played back

Some applications display a photo file pre-
installed in the PC simultaneously with music
playback when using the renderer function.
Depending on the pre-installed photo file, music
playback may not be possible, but may become
possible by changing the photo file.
You could not connect Internet

Check that the LAN cable or AC power cord of the
router/modem* has been connected properly.
* Your router/modem must be set in advance to
connect to the Internet. Contact your Internet
service provider for router/modem settings.
You do not have YouTube ID

If you do not have a YouTube ID and password,
register them through the address below.
http://www.google.com/device
(You can also register a YouTube ID and password
from your PC.)
After registering your ID, you can use it
immediately.
36
GB
t t
[Network]
[Media Server

General

The TV turns off automatically (the TV enters
standby mode)

Check if the [Sleep Timer] is activated (page 23).

Check if the [Duration] is activated by [On Timer]
(page 23) or [Photo Frame Settings] (page 22).

Check if the [Idle TV Standby] is activated
(page 25).
Some input sources cannot be selected

Select [Manage Inputs] and select [Always] of the
input source (page 24).
The remote control does not function

Replace the batteries.
HDMI equipment does not appear on [BRAVIA
Sync Device List]
t

[Home Check that your equipment is compatible with
BRAVIA Sync Control.
Cannot select [Off] in [BRAVIA Sync Control]

If you have connected any audio system that is
compatible with BRAVIA Sync Control, you cannot
select [Off] in this menu. To change the audio
output to the TV speaker, select [TV Speakers] in
the [Speakers] menu (page 24).
The [Parental Lock] password has been
forgotten

Enter 4357 for the password.

Update password by pressing HOME and select
[Settings]
[Change Password].
Store Display Mode or Promoting Feature
Logo appears on the screen

On the remote control, press RETURN then press
HOME and select [Settings]
[Setup]
[Home] in [Location].
t [Preferences] t
t
t
[Auto Startup]. Be sure to select
[Parental Lock] t
t
[Preferences]