Mirage IAEH181A Owner's Manual page 17

Function introduction for combination buttons
46 F heating function
°
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to
start UP OR TURN OFF 46°F heating function. When this function is started
up, " " and "46°F" will be shown on remote controller, and the air
conditioner keep the heating status at 46°F. Press "TEMP" and "CLOCK"
buttons simultaneously again to exit 46°F heating function.
Note:
• Under 46°F heating function, fan speed is defaulted at auto speed and it
can't be adjusted.
• Under 46°F heating function, set temperature can't be adjusted. Press
"TURBO" button and the remote controller won't send signal.
• Sleep function and 46°F heating function can't operate at the same time. If
46°F heating function has been set under cooling mode, press sleep button
will cancel 46°F heating function. If sleep function has been set under cool-
ing mode, start up the 46°F heating function will cancel sleep function.
Child lock function
Press "▲" and "▼"simultaneously to turn on or turn off child lock function.
When child lock function is on, "
you operate the remote controller, the "
sending signal to the unit.
Temperature display switchover function
Under OFF status, press "▼" and "MODE" buttons simultaneously to switch
temperature display between °C and °F.
" icon is displayed on remote controller. If
" icon will blink three times without
14