Mirage IAEH181A Owner's Manual page 14

Introduction for buttons on remote controller screen
TURBO button
5
Under COOL or HEAT mode, press this button to turn to quick COOL or
quick HEAT mode. "
button again to exit turbo function and "
▲/▼ button
6
• Press "▲" or "▼ " button once increase or decrease set temperature 1
˚C (1°F); Holding "▲" or "▼ " button, 2s later, set temperature on remote
controller will change quickly. On releasing button after setting is finished,
temperature indicator on indoor unit will change accordingly. (Temperature
can't be adjusted under auto mode)
• When setting TIMER ON, TIMER OFF or CLOCK, press "▲" or "▼" button
to adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons) When
setting TIMER ON, TIMER OFF or CLOCK, press "▲" or "▼ " button to
adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons)
SLEEP button
7
Under COOL, HEAT or DRY mode, press this button to start up sleep
function. " " icon is displayed on remote controller. Press this button
again to cancel sleep function and "
8 TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient
temperature or outdoor ambient temperature on indoor unit's display. The
setting on remote controlleris selected circularly as below:
• When selecting "
indicator on indoor unit displays set temperature.
• When selecting "
indoor unit displays indoor ambient temperature.
• When selecting "
indoor unit displays outdoor ambient temperature.
Note:
• Outdoor temperature display is not available for some models. At that time,
indoor unit receives "
" icon is displayed on remote controller. Press this
no display
" or no display with remote controller, temperature
" with remote controller, temperature indicator on
" with remote controller, temperature indicator on
" signal, while it displays indoor set temperature.
" icon will disappear.
" icon will disappear.
11