User Documentation - Honeywell CK75 Quick Start Manual

To restart the computer if the touch panel display is
unresponsive:
• Press and hold the Power button for approximately 8 seconds
until the computer restarts.
Note: If you try to restart the computer and still experience
issues, you may need to see the user guide for information
on how to perform a Factory Reset (Clean Boot).
Use Battery Swap Mode for Battery Replacement
You should always place the computer in Battery Swap mode
before removing the battery. Battery Swap mode places the
computer in a low power state so that the battery can be
removed for a short period of time.
To activate Battery Swap mode:
1. Press and hold the Power button until the options menu
appears.
2. Touch Battery Swap.
3. After replacing the battery, press and release the Power
button to wake the device.
Support
To search our knowledge base for a solution or log into the
Technical Support portal and report a problem, go to
www.hsmcontactsupport.com.

User Documentation

For the user guide and other documentation, go to
www.honeywellaidc.com.
13